中文

 

KFO 777

White translucent liquid

KFO 777 is a blend of ingredients designed to give maximum defoaming efficiency under a wide variety of conditions. KFO 777 is manufactured from food grade ingredients under Good Manufacturing Practices. All ingredients are listed in 21 CFR 173.340 for use as a defoamer in yeast and beet sugar processing. Consideration for other FDA permitted uses would require further evaluation.

Product Details

Attribute Value
Typical Properties
Appearance @ 25°C White translucent liquid
Viscosity @ 25°C 250 – 470 cPs
Specific Gravity @ 25°C 0.970 – 1.02
Odor Mild
Density, lb/gal @ 25°C 8.34
Flash Point, PMCC, °C > 100
Application Group Application
Food Fermentation
Food Starches
Food Industrial Uses
Other Silicone Food Grade Defoamers

Silicone Food Grade Defoamers

Product Description
Foam Blast® 10KA concentrated silicone-based defoamer that does not contain any water.
Foam Blast® 106CTCombines excellent dilution stability with effective defoaming efficiency in a wide range of applications, and can be used to suppress and control foam in both hot and cold applications over a wide pH range.
Foam Blast® 150KA 30% silicone-based general purpose process aid defoamer that can be used to suppress and control foam in both hot and cold applications over a wide pH range.
Foam Blast® 500AA 10% silicone emulsion defoamer. This product can be used to suppress and control foam in both hot and cold applications over a wide pH range.
Foam Blast® 80239A silicone enhanced defoaming agent especially effective in potato processing, and can be used in both hot and cold processes.
Foam Blast® DHSExtremely effective in food processing where high starch and protein content are present.
Foam Blast® LB-10SKA 10% nonionic silicone-emulsion defoamer/ antifoam. The extreme hydrophobicity of the fine silica particles in and the unique emulsification system make it superior in quality in the way of rapid foam knock-down (defoaming), and long-term foam suppression (antifoaming).
Foam Blast® LB-20SKA 20% nonionic silicone-emulsion defoamer/ antifoam. The extreme hydrophobicity of the fine silica particles in and the unique emulsification system make it superior in quality in the way of rapid foam knock-down (defoaming), and long-term foam suppression (antifoaming).
Foam Blast® LB-30SKA 30% nonionic silicone-emulsion defoamer/ antifoam. The extreme hydrophobicity of the fine silica particles in and the unique emulsification system make it superior in quality in the way of rapid foam knock-down (defoaming), and long-term foam suppression (antifoaming).
Foam Blast® PDR 10A 10% silicone-based powder defoamer designed to be used in systems where a powder is better suitable than liquids. Avoiding introduction of water as one of the components in formulations is one of the benefits of a powder defoamer.
KFO 105A 10% silicon-based general purpose defoamer.
KFO 107A concentrated, food grade silicone compound-based defoamer that is very efficient in controlling foam in nonaqueous, food and industrial applications.
KFO 205A 20% silicon-based general purpose defoamer.
KFO 305A 30% silicon-based general purpose defoamer.
KFO 639BA combination of fatty acid esters for use as a highly active defoamer with a quick knockdown and long suppression time.
KFO 777A blend of ingredients designed to give maximum defoaming efficiency under a wide variety of conditions.
KFO 1110BDeveloped for use in the potato industry and it also has been found beneficial in distillation, fermentation, latex, and wastewater applications.
KFO 1204AA blend of ingredients to help control foam in different processes in the food industry.
KFO 6450A food grade foam control agent for use in the food industry.
KSIL 100SSilicone compound has been found very efficient to control foam in non-aqueous, food and industrial applications. It is suitable for use in food applications to control foam.
Masil® EM 350A 37.4% emulsion of food grade 350 cSt polydimethylsiloxane fluid formulated with added surfactants and preservatives that can be used as a lubricant for polyethylene, making extensible papers, and release agent for paper forming. It can also be used as an antiblocking agent for wax-coated paper and a synthetic fiber lubricant.
Masil® SF 350FGA food grade polydimethylsiloxane (PDMS) silicone fluid used as a defoamer/antifoam in a wide range of food processes and the main component in silicone emulsions for food and industrial uses with an average viscosity of 350 centistokes (cSt).
Masil® SF 1000A food grade polydimethylsiloxane (PDMS) silicone fluid used as a defoamer/antifoam in a wide range of food processes and the main component in silicone emulsions for food and industrial uses with an average viscosity of 1000 centistokes (cSt).
Mazu® DF 200SCA concentrated silicone-based defoamer that does not contain any water.
Mazu® DF 210SCCombines excellent dilution stability with effective defoaming efficiency in a wide range of applications. It can be used to suppress and control foam in both hot and cold applications over a wide pH range.
Mazu® DF 230SCA 30% silicone-based general purpose process aid defoamer that can be used to suppress and control foam in both hot and cold applications over a wide pH range. It combines excellent dilution stability with effective defoaming efficiency in a wide range of applications.